Home > Countries > Germany > Inductors made in Germany
Home > Categories > Inductors > Inductors made in Germany

Inductors made in Germany

All products made in
Germany All products from
Inductors

Neosid SMD antenna inductor, 8.2 mH, SMD, 40 Ω (40R)

Neosid SMD antenna inductor, 8.2 mH, SMD, 40 Ω (40R)

Neosid Filter coil, pre-adjusted, PCB mounting, 3.3 µH, 100-300 MHz

Neosid Filter coil, pre-adjusted, PCB mounting, 3.3 µH, 100-300 MHz

Neosid Filter coil, pre-adjusted, PCB mounting, 4.7 µH, 100-300 MHz

Neosid Filter coil, pre-adjusted, PCB mounting, 4.7 µH, 100-300 MHz

Neosid SMD antenna inductor, 0.33 mH, SMD, 4 Ω (4R0)

Neosid SMD antenna inductor, 0.33 mH, SMD, 4 Ω (4R0)

Sumida SMD-Inductor 0603, 0.15 µH, ±10 %, 5506 151 24 00

Sumida SMD-Inductor 0603, 0.15 µH, ±10 %, 5506 151 24 00

Neosid Filter coil, pre-adjusted, PCB mounting, 15 µH, 100-300 MHz

Neosid Filter coil, pre-adjusted, PCB mounting, 15 µH, 100-300 MHz

Sumida SMD-Inductor 0603, 0.33 µH, ±10 %, 5506 331 24 00

Sumida SMD-Inductor 0603, 0.33 µH, ±10 %, 5506 331 24 00

Sumida SMD-Inductor 0603, 39 µH, ±10 %, 5506 390 24 00

Sumida SMD-Inductor 0603, 39 µH, ±10 %, 5506 390 24 00

Sumida SMD-Inductor 1206, 0.12 µH, ±10 %, 5503 121 22 00

Sumida SMD-Inductor 1206, 0.12 µH, ±10 %, 5503 121 22 00

Sumida SMD-Inductor 1206, 0.33 µH, ±10 %, 5503 331 22 00

Sumida SMD-Inductor 1206, 0.33 µH, ±10 %, 5503 331 22 00

Sumida SMD-Inductor 0805, 0.82 µH, ±10 %, 5508 821 22 00

Sumida SMD-Inductor 0805, 0.82 µH, ±10 %, 5508 821 22 00

Neosid Filter coil, pre-adjusted, PCB mounting, 1 µH, 100-300 MHz

Neosid Filter coil, pre-adjusted, PCB mounting, 1 µH, 100-300 MHz

Sumida SMD-Inductor 0805, 6 µH, ±20 %, 5508 050 12 00

Sumida SMD-Inductor 0805, 6 µH, ±20 %, 5508 050 12 00

Neosid SMD antenna inductor, 10 µH, SMD, 0.12 Ω (R12)

Neosid SMD antenna inductor, 10 µH, SMD, 0.12 Ω (R12)

Neosid Suppressor inductor, 4.7 mH, 22 mA, 20 Ω (20R)

Neosid Suppressor inductor, 4.7 mH, 22 mA, 20 Ω (20R)

Neosid Suppressor inductor, 2.2 mH, 0.11 A, 21 Ω (21R)

Neosid Suppressor inductor, 2.2 mH, 0.11 A, 21 Ω (21R)

Neosid SMD suppressor inductor, 0.1 mH, 3 A, 0.19 Ω (R19)

Neosid SMD suppressor inductor, 0.1 mH, 3 A, 0.19 Ω (R19)

Neosid SMD common-mode inductor, shielded, 10 µH, 0.75 A, 0.1 Ω (R10)

Neosid SMD common-mode inductor, shielded, 10 µH, 0.75 A, 0.1 Ω (R10)

Neosid Suppressor inductor, 22 µH, 0.56 A, 0.85 Ω (R85)

Neosid Suppressor inductor, 22 µH, 0.56 A, 0.85 Ω (R85)

Neosid HF coil installation set, 6.5 µH, PCB mounting, 85 °C

Neosid HF coil installation set, 6.5 µH, PCB mounting, 85 °C

Neosid HF coil installation set, 8.5 µH, PCB mounting, 85 °C

Neosid HF coil installation set, 8.5 µH, PCB mounting, 85 °C

Neosid HF coil installation set, 3 µH, PCB mounting, 85 °C

Neosid HF coil installation set, 3 µH, PCB mounting, 85 °C

Neosid HF coil installation set, 2.5 µH, PCB mounting, 85 °C

Neosid HF coil installation set, 2.5 µH, PCB mounting, 85 °C

Neosid Suppressor inductor, 0.22 mH, 0.3 A, 2.8 Ω (2R8)

Neosid Suppressor inductor, 0.22 mH, 0.3 A, 2.8 Ω (2R8)

IMPORTANT NOTICE:

Brands and companies often have more than one factory for the same type of products, so the country listed on this page may not be the only place of production. We only present information we were able to find and we do not pretend to be the comprehensive or ultimate source of information.
The production site of a particular product can change over time and we may not be able to reflect that change in a timely manner. Each product has information about the date it was added to our database. The place of production may have changed since then or new place may have been added.
We can't guarantee the completeness or accuracy of presented information. This site is for informational purposes only. We do my best to ensure that the information is accurate and up to date, but this is not always possible. Part of our data can be outdated. We collect data for several years and some products can be no longer manufactured. Place of production of some other products can be changed.
We cannot guarantee all of our data is 100% accurate. Not all our sources are equally reliable. We are rather trying to show a broader picture and a structure of the production across the world.
We use various resources to gather data. Information about some items was sent by manufacturers, some were manually collected from manufacturer or dealer websites, some were programmatically collected from these websites, some were sent by our visitors.
We are unable to constantly trace each product if it still manufactured in the same location as the year ago. It is almost impossible to always have a source of information for the given product.